Black Sheep - Gallery

• 
  The Black Sheep Brewery logo
• 
  The brewery was once Lightfoot's maltings in Masham
• 
  The entrance to the visitors facilities
• 
  The Black Sheep portfolio on sale
• 
  The Black Sheep Bistro
• 
  Black Sheep Bitter pump clip
• 
  The new cask racking room - on the right is the brewhouse
• 
  Casks arrive on the 'Sheepy Shifter' from the local depot
• 
  Off loading empty casks for washing
• 
  Diesel fork lift clamp truck taking casks to the line
• 
  View of the line built by Microdat; dirties in on the right, debung, wash, label and rekeystone, fill and seal, palletise and away
• 
  The truck driver moves the locator board from a layer of empties to a layer of fulls
• 
  Making sure the keystone is uppermost, the casks pass to the deshive and dekeystoning machine
• 
  Casks enter the washing machine
• 
  The rear of the Microdat cask washer
• 
  The washer has 10 stations
• 
  View of the discharge end. The cask is upended and an operator places a new keystone into the aperture…
• 
  …a machine presses it home and the Logopak machine adds a label
• 
  The four lane filling machine
• 
  The filling head has two stations, this one fills the cask….
• 
  …then the beer head disengages, the operator places a shive in the aperture and the frame moves back and the shive is pressed home
• 
  *******
• 
  The Velderflex pumps for metering in the isinglass finings
• 
  Four cleaning nozzles for the beer heads
• 
  The cask is upended and heads towards the camera for palletising
• 
  A completed three layer pallet is created by the truck operator
• 
  This fiercesome device will grab a cask inside the chime and lift it on to flat pallets as required by some customers
• 
  Inside the brewhouse
• 
  The old mash tun, you can just about see the grist case above and the underback taps below
• 
  The original mash tun (and copper) came from Hartleys at Ulverston
• 
  The old copper dates from 1947, Grange Engineering in Burton on Trent fitted a stainless inside
• 
  The manway is not visible from the visitors walkway
• 
  The external calandria for the copper
• 
  Head Brewer Paul Ambler with the new mash tun which was built by Grange Engineering.
• 
  The spent grain chutes….
• 
  ..and two positive displacement Seepex pumps
• 
  In the hop room
• 
  Hops from Kent..
• 
  Hops from Sussex..
• 
  ..and hops from Herefordshire
• 
  Head Brewer Paul Ambler rubs the hops
• 
  The new mash tun side commissioned in 2004 ****
• 
  Grange Engineering's Steels masher and grist case
• 
  Yorkshire square 'rounds' built new by Shobwood from Burton on Trent
• 
  The operator is cropping the yeast from the left hand 'square' - note the rousing fantail on the righthand FV
• 
  Cropping the yeast
• 
  A venerable slate square rescued from Darleys at Thorne
• 
  A slate square in action
• 
  A round square in action
• 
  The top floor is domed for strength, the starting wort level will touch the underside of the floor at the periphery leaving 100mm freeboard under the hole
• 
  Operators Dan Scott Paul and Steve Wilson
• 
  Brewers Astrid Hewitt and Alan Dunn
• 
  Maturation vessels
• 
  The beer processing block