Hall & Woodhouse - 12 March 2012: Difference between revisions
No edit summary |
m (Bhadmin moved page Hall & Woodhouse Ltd - photographs taken by Roger Putman - 12 March 2012 to Hall & Woodhouse Ltd - photographs taken by Roger Putman -12 March 2012 without leaving a redirect) |
(No difference)
| |
Revision as of 19:32, 2 June 2016
More heritage in the new brewhouse - only 16 Head Brewers since 1777
A timeline for the Company behind the wort prerun vessel and the lauter tun. The nominal brewlength is 150hL at 1050o
The conical topped copper on the left and the whirlpool
Adding the T90 hop pellets
The brewhouse operator's work station using Braumat Compact software
The 300hL raw water tank on the left with acid dosing and the cold liquor tank in the corner
The 1899 brewery buildings are just across the yard
The copper has a tangential wort entry even though the brewhouse has a whirlpool
In the brewhouse basement - trub tank and whirlpool showing the tangential inlet with the external wort boiler behind.
The brewhouse detergent cleaning tanks in the basement
The lauter tun run off tubes
The Seepex displacement pump used to move the spent grains to the silo
Wort cooling heat exchanger and the spent grain main to the silo
Wort oxygenation equipment
The 1899 Boby mill is still in service after new rollers in 1974 and a total refurb
The bulk grain intake station
Another view of the old brewery buildings
The new 40t spent grain silo
Trub tank, whirlpool, CIP set and prerun vessel bottoms
A drawing of the 1899 brewery in the visitor centre. It cost £28,000 which was 40% over budget - perhaps nothing changes!
A rotating device in the whirlpool to remove the trub cone
The 1899 brewery buildings will turn into residential properties
The tops of five 575hL dual purpose vessels moved as part of the new brewhouse project
Three new 150hL FVs were built by Musk, the tops are on the floor below the larger vessels to ensure all the cones are on the same level
View of the vessel cone area
Cones of the three 150hL vessels and a new 375hL FV at the rear
Illustrious forebears of the current family owners
All brewhouse vessel manways are decorated
The grist inlet conveyor and hydrator above the mash mixer
